cost to build asphalt road
The cost to build an asphalt road depends on the size of the project, but it can be anywhere from $2,000 per mile to $10,000 per mile.
Asphalt roads are made from crushing rock and adding a mixture of sand and water. The mixture is then compacted into a solid form. Asphalt roads are typically used for residential or commercial parking lots or low-traffic areas where a smoother ride is desired. Asphalt roads are built over gravel or concrete foundations and are designed for vehicles weighing less than 10 tons. The following factors may affect the cost of building an asphalt road:
Size of project – Small projects may require only one truckload of material, while large projects may require multiple loads.
Type of equipment – Asphalt plants use specialized equipment that can add significant costs to your project if you don’t already have access to it yourself.
Location – Materials must be shipped in some cases, which adds extra costs to your project.
cost to build asphalt road
You should know the cost of your asphalt road construction project before you go ahead with it. Asphalt roads are used for light and medium-duty traffic but not for heavy vehicles. The construction costs for these roads depend on the type of asphalt used, the width and length of the road, as well as other factors.
Cost of Road Construction Per Mile by State
The average cost to build a new asphalt road per mile varies from state to state. According to an article by Concrete Network, it costs $5,000 per mile in Tennessee and $7,500 in Alaska. In other states like Florida and Texas, it may cost about $8,000 per mile for residential streets while commercial roads may cost up to $25,000 per mile. A study conducted by The Pavement Report shows that the average cost per lane-mile ranges between $20,000-$60,000 depending on the type of material used (asphalt concrete or Portland cement concrete) and maintenance requirements during its lifetime
Construction cost per mile is the average cost to build a mile of road. It includes construction costs such as labor and material but does not include other costs like design and engineering fees, permits and equipment leasing.
Cost to build a road depends on various factors such as terrain (flat or hilly), road width and length, traffic volume, etc. Road construction cost calculator helps you determine the average cost of building a road in your state by entering the required information.
Asphalt Paving Cost: The asphalt paving cost varies from state to state depending on factors like type of asphalt used, area covered and type of project involved. For example: A 30-year asphalt concrete pavement has an average price tag of $1,924 per lane mile while an overlay can cost around $1,995 per lane mile.
Concrete Paving Cost: Concrete sidewalks and driveways are generally cheaper than asphalt driveways because they use less material than asphalt driveways do thus reducing overall concrete paving expenses significantly.
The cost to build an asphalt road varies by state, but it can be as much as $3 million per mile. The cost of road construction per mile varies depending on the size of the project, its scope, and the quality of materials used.
Cost Breakdown for Paving a Road
The cost to pave a road depends on many factors:
The type of surface you want (aggregate base or asphalt concrete)
The length of your road (the average length is 3 miles)
The width of your road (the average width is 15 feet)
The depth of your pavement layers (typically 2 inches deep)
Asphalt road construction costs vary across the United States. The following chart provides average asphalt road construction costs for a variety of urban and rural locations.
Asphalt road construction costs vary across the United States. The following chart provides average asphalt road construction costs for a variety of urban and rural locations.
Road Construction Costs Per Mile By State
The following chart shows the cost per mile to construct an asphalt road in each state:
Asphalt Pavement Cost Per Mile
Asphalt is a road paving material that is heavily used in the United States, and for good reason. It is durable, cost-effective, and easy to maintain. Asphalt can last between 20 to 30 years depending on how often it is maintained. The asphalt pavement cost per mile varies based on the location of the project, but typically ranges from $2,100 to $4,600 per mile.
The asphalt pavement cost per mile will depend on several factors:
Type of asphalt – There are three common types of asphalt used in road construction: modified bitumen (MB), hot mix asphalt (HMA) and cold mix asphalt (CMA). MB asphalt requires less maintenance than HMA or CMA due to its ability to resist cracking better than other types of asphalt pavers. However, MB asphalt does not handle temperatures as well as HMA or CMA pavers. HMA pavers are more expensive than MB pavers because they require more materials and equipment during installation.