Cost to build an interior wall
The average cost to build an interior wall is $0.94 per square foot. This price includes labor, materials and any required permits. It also factors in the type of project you’re doing, whether it’s new construction or remodeling work.
The cost to build an interior wall varies by region, but a good starting point is $0.94 per square foot. For example, if you have 1,200 square feet of drywall to install, expect to pay about $1,050 for labor and materials alone. If you need permits for your project, add an additional $250-$300 to that total.
In general, it can be more expensive to build an interior wall than an exterior one because the materials are more expensive and there are fewer aesthetic options available at home improvement stores. However, there are ways to save money on the job if you know what questions to ask:
Cost to build an interior wall
A typical wall framing project costs about $4 per square foot for labor and materials. The exact cost depends on factors such as how much work the framing crew has to do, how many walls need to be framed, and whether there are any special considerations (like working around ductwork).
This article will look at some of the factors that influence the cost of framing a room. We’ll also discuss how you can save money on your next project by doing some of the work yourself.
The cost to build an interior wall varies greatly depending on the type of wall and the materials used. For example, the cost of framing a partition or drywall is much less than framing a standard load-bearing wall.
Cost to frame a partition wall (per linear foot)
The average cost to frame a partition wall is $60 per linear foot. This includes the cost of materials and labor.
Cost to frame a drywall wall (per linear foot)
The average cost to frame a drywall wall is $50 per linear foot. This includes the cost of materials and labor.
How Much Does It Cost to Build a Wall?
How much does it cost to build a wall? Interior walls are typically made from drywall or plaster. Drywall is the most common material used in residential homes, and it comes in 4′ x 8′ sheets that you can buy at home improvement stores. Drywall costs about $3-$5 per sheet.
A typical interior wall can be built for less than $100 total, including materials and labor costs. The actual amount will vary depending on your contractor’s hourly rate, the complexity of your project, and other factors like whether you need help with demolition or debris removal when they’re done.
Here is a list of some basic costs for building an interior wall:
• Material (lumber): $4-$10 per linear foot
• Hardware: $3-$5 per linear foot
• Labor costs: $11-$15 per linear foot (including materials)
A typical interior drywall wall costs $125 per linear foot. This includes the cost of materials and labor. The cost varies depending on the complexity of the job and the type of materials used.
Interior walls can be built using two different techniques:
Screws are commonly used to build interior walls because they are inexpensive, easy to install and require no special tools. Screws can be used to hang drywall panels, attach them to framing members and secure furring strips or other support devices.
Nails are sometimes preferred over screws because they’re stronger and more effective at holding the drywall in place. However, nails are more expensive than screws, require more time during installation, and often require a pneumatic nail gun for proper installation.
The cost of building an interior wall depends on the structure of the wall, how many studs and sheets of drywall you use and how much labor is required for installation. If you’re looking for a simple stud-and-drywall wall that won’t need any special framing or finish work, expect to pay between $1 and $2 per square foot for materials alone.
That’s not including the cost of hiring someone to install the wall, which can add anywhere from 10 percent to 15 percent more onto your total project costs. In general, if you want professional help installing your new walls, expect to pay about $20 per hour for labor.
How much does it cost to build an interior wall?
Interior walls are the most common type of wall construction in residential homes. They are typically built with 2×4 or 2×6 lumber and drywall, with insulation installed between the studs. The cost of an interior wall can vary widely depending on the size, construction method and materials you choose.
Cost breakdown for a typical interior wall
The average cost for a 4-by-8-foot wood frame wall is $12 per square foot (psf), according to HomeAdvisor’s Cost vs. Value Report. For example, if you have a total project size of 1,000 square feet, your total project cost would be $12,000 to $15,000 (1 psf). This doesn’t include any additional costs such as labor and materials choices like insulation or windows.
To find out more about how much it costs to build an interior wall per square foot by region and material type, check out our Cost vs. Value Report: Interior Walls infographic below!
Interior Wall Framing Cost Calculator
Interior wall framing costs depend on a variety of factors, including the size and complexity of the job. Use this calculator to estimate the cost of building an interior wall.
The cost of building an interior wall can vary significantly based on the design and materials used.
The following chart provides average costs for various types of interior walls:
Type of Wall
Cost Per Linear Foot (in US Dollars)
Interior Wall Framing Cost Calculator
Drywall Per Sheet
Sheetrock is the most popular drywall brand in the United States. A sheet of 4′ x 8′ sheetrock costs $2.28 per square foot. The total cost of a 4’x8′ sheet of sheetrock is $16.64 per sheet or $110.08 for 10 sheets. The total cost of 10 sheets would be $110.08 + $60 = $170.08 or $1,701 for 500 square feet.
Cost Per Linear Foot
The cost per linear foot is calculated by dividing the total cost by the length:
$1,701 / 5 feet = $347 per linear foot
Interior Wall Framing Cost Calculator
A wall framing contractor will determine the cost of your project based on the type of framing required.
Some common types of wall framing include:
Drywall Framing:
Drywall is a popular choice for interior walls because it’s inexpensive and easy to install, yet also provides some insulation against sound and heat. The drywall installer will attach the drywall panels to the studs using nails or screws, depending on the type of drywall used. The corners of each panel are usually mitered to create a 90-degree angle so they fit together seamlessly once installed.
Partition Framing:
Partitions are often used to divide space within a building without creating an actual doorway or opening into another area. A partition can be constructed from various materials, including wood or steel. Partition framing contractors typically use sheetrock for partitions because it’s easy to cut and install as needed. However, other materials such as glass block windows or even mirrors may be used if desired. Partitions are often used in offices and retail stores where they provide privacy while still allowing light through from one area to another.