How to build a retaining wall youtube

I bet most people on the internet is seeking for information about how to build a retaining wall with blocks, or how to build a retaining wall with bricks. Yup, you are aware of it. Do you ask why? Let me answer that question for you. Todays society has developed very fast in the last decades and especially with the internet, even if they don’t know it. The internet has provided us with lots of opportunities in many ways, and most importantly it’s made all the knowledge on earth accessible within seconds.

We build retaining walls for different reasons. Sometimes it is to allow for a flat, level surface on one side of the wall, and other times it is to allow for a flat, level surface between the retaining wall and the ground. The type of blocks or bricks we use will depend on what we intend to do with the wall after construction. One way we can build a retaining wall is by using stacked clay blocks.

How to build a retaining wall youtube

In this tutorial, we’ll learn how to build a simple and inexpensive mortarless retaining wall. The wall is made of concrete blocks and it has no mortar between the blocks, which means that you can install it yourself.

Materials needed:

Concrete blocks, 16 inches x 8 inches x 8 inches (41 cm x 20 cm x 20 cm)



Sand, coarse (not fine)

Tools required:


How to build a retaining wall with blocks

Building a retaining wall is a great way to add value to your home and landscape. A retaining wall can also be used as an outdoor living space or as an attractive border for flower beds and vegetable gardens.

Whether you’re building a simple block-wall or something more intricate, it’s important that you follow good construction practices. Here are some tips to help you build a solid retaining wall:

1. Check local regulations regarding building permits and setbacks from property lines.

2. Mark the location of all utilities underground before digging begins (gas, water and sewer lines).

3. Dig two trenches so they intersect at the center point of where you want your wall to be located. The depth of each trench should be 2 feet longer than the height of the wall itself. Each trench should also be about 5 feet wide by 6 inches deep at its top edge; this will allow for plenty of support for the blocks used in construction later on down the road. These trenches will help prevent erosion from occurring when rainwater flows over exposed dirt banks surrounding your new structure after it’s built out of blocks or concrete blocks).

4. Pour concrete into these trenches using pre-mixed cement and gravel (the ratio is

How to Build a Retaining Wall – DIY ProjectHow to Build a Retaining Wall | DIY Made Easy | Adbri Masonry - YouTube

Building a retaining wall is not as difficult as it seems. If you have some masonry skills and some basic tools, you can build a retaining wall in no time. You will need to have the right materials, which are available at your local home improvement store.

Step 1: Decide on the Size of Your Wall

The first thing you need to do when building your own wall is decide on the size of your wall. This can be done by measuring the length and width of your yard area where you want the wall built. Once you have determined this information, you can purchase blocks or bricks that are slightly smaller than what you calculated (about an inch). This will allow room for expansion once they are laid into place.

Step 2: Prepare Your Soil

After deciding on what kind of material you want to use for your retaining wall, fill in any holes or dips in the soil with gravel or sand before laying any blocks down. This will help keep them from sinking into soft ground when pressure is applied against them during construction.

If you have a slope in your yard, you’ll need to build a retaining wall to hold back the soil and make the slope look more natural. The easiest way is to use concrete blocks.

Step 1: Decide on a design

The first thing you’ll need to do is decide what kind of retaining wall you want. There are many different designs available, but they all follow the same basic principles. Here are some examples:

A Simple Retaining Wall – This is the easiest type of retaining wall to build and it’s also one of the most common. It consists of a series of blocks or bricks stacked on top of each other at an angle so that any water flows into drainage pipes placed at the bottom of the slope. You can build this type of wall with either concrete blocks or bricks (see below for details).

A Concrete Block Retaining Wall – This type of retaining wall uses concrete blocks stacked on top of each other to create a sturdy barrier against erosion from rainwater or snowmelt from hillsides and mountainsides. If you plan on using this type of design, you should choose your blocks carefully so that they are compatible with one another (e.g., all 5-foot blocks).

I’m going to show you how to build a retaining wall using cinder blocks. This project can be done in one day and the cost is very inexpensive.

The first thing you need to do is measure and mark your spot where you want your retaining wall to be built. Make sure that it’s level and plumb.

Now that you’ve got everything marked out, start digging out some dirt in preparation for putting in your block wall. Make sure that you dig out enough room for the blocks to sit on top of each other with no gaps or spaces between them.

1) Measure and mark where your first block will go — it doesn’t matter which side of the line, just make sure it lines up with all of the other blocks on that side of the wall later on when we’re putting them together.

2) Use a level (or put shims under whatever board you’re using as a guide) to make sure that your first block is straight up-and-down before placing it into position with its top surface flush against the ground level line that we marked earlier — this helps ensure that there won’t be any gaps at the top or bottom of each row of blocks when they’re put together later on during step 3). Then use

DIY Home Project Videos | Adbri Masonry

Retaining walls are used to hold back soil and create level areas for gardens. There are two main types of retaining walls: freestanding and braced. Freestanding walls are built without any support from other structures, while braced walls rely on the ground behind them for support.

Whether you’re building a freestanding or braced wall, you’ll need to determine how big it needs to be by measuring the amount of soil that will be held back by the wall. You also need to decide whether you want the wall to be straight or curved and how high it should be.

Building a Retaining Wall with Bricks

Step 1: Determine Height of Retaining Wall and Length of Footings

Determine the height of your retaining wall by measuring from grade level (where the ground meets the house’s foundation) up to the top of where you want your back yard area to end. This can vary depending on how steeply sloped your property is and how much dirt you want to hold back behind it. For example, if you have 10 feet between grade level and where you want your back yard area to end, then measure up 10 feet from grade level; this

Building a retaining wall is a great way to enhance your landscape, and it can be done in any size or shape. A retaining wall is basically a structure that keeps soil from eroding away. You can build a straight or curved wall, or even add an arbor or trellis to the top of the wall.

Materials needed include:


Block mortar

Trowel or tamping tool

Gravel (1/8-inch minus)

How to Build a Retaining Wall

A retaining wall is a structure that holds back the earth or other material that would otherwise slide down or erode away. A retaining wall is usually made of concrete (the most common), brick, or stone.

Retaining walls are often used in landscaping to create level areas for planting or gardening, and they can also be used to hold back earth that has been excavated for construction projects.

Retaining walls may be as simple as a single row of blocks or bricks stacked on end, known as dry stone walls, or they can be much more complex and include multiple layers of blocks or bricks staggered vertically and horizontally in different directions.

You can build a retaining wall out of blocks or bricks if you have some experience with working with masonry materials like concrete and mortar. But there are also less labor-intensive methods for building your own retaining wall if you don’t have much experience working with these types of materials.

If you are looking to build a retaining wall, there are several options available to you. The most popular choice is the block retaining wall. This type of wall has been used for centuries and still remains popular today due to its durability and ease of construction.

One of the advantages of using blocks is that they can be made from a variety of materials including concrete, stone or brick. Blocks are typically used in home landscaping projects such as garden walls or walkways. They can also be used as steps or retaining walls.

Block Retaining Wall Instructions

The first thing you need to do is pick out your blocks and make sure they are all cut to size and level. Check them against each other with a leveler tool. Make sure all sides are even before laying them out on the ground where you want your retaining wall to be built.

Place one block in front of another until you reach the desired height for your wall. Then use stakes or wooden boards as spacers between each row of blocks so that they stay straight while being stacked together. This will help prevent any gaps from occurring between your bricks when they are stacked up against each other during construction

A retaining wall is a structure built to hold back soil and/or rock from a building or roadway. Retaining walls are typically of large, heavy blocks or poured concrete, but may also be of natural stone, brick or even wood.

Retaining walls can be freestanding structures that come in all shapes and sizes, from short, vertical walls to long, sloping terraces. They are used for many purposes: to prevent erosion by keeping soil where it’s supposed to be; as a sound barrier between properties; to create level planting areas or parking spaces; or simply as decoration.

The most basic kind of retaining wall is made with stacked blocks of concrete or stone called “riprap” (short for rubble riprap). Riprap retaining walls are generally the least expensive way to build a retaining wall because they require no excavation and only minimal cleanup after installation. But they do require maintenance every few years because they tend to deteriorate quickly under heavy loads if not properly maintained.

Riprap retaining walls are relatively inexpensive compared with other types of construction materials because they’re easy to install with little labor involved and don’t require any special skills besides those required for any type of concrete work

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *