How to build a seating wall with pavers

Building a seating wall with pavers or cinder block might sound like a tricky job. However, with this step-by-step tutorial, it can be done by anyone. It is important to read the instructions carefully and double-check your measurements before you start building anything.

Building a seating wall can sound like a very complex task. This is especially the case when you are trying to complete this project around your house. However, once you know some of the basic techniques and what supplies to have on hand, it’s really not that difficult of a project. It may appear complicated at first glance, but after reading through this article and looking over some pictures, hopefully you will not feel quite as intimidated by the idea of building one yourself.

How to build a seating wall with pavers

This post is about how to build a seating wall, with cinder blocks, and pavers. I think this is such a cool idea. I love how it looks and it’s so easy to do.

The first thing you want to do is decide where you want your seating wall to go. Then measure out the area that you need for the pavers. You want it to be wide enough for two people to sit on it if possible. The depth will depend on the size of your yard, but don’t make it too deep because then it will look weird when someone sits on top of it.

Once you have an idea of what size you want, mark off where each paver will go and use a level as well as a tape measure to make sure they are straight. Once they are all in place, stand up each one individually so that they are lined up perfectly with each other and then put them down again so that they are flat and level with each other.

Once all of the pavers are laid out where they need to go, fill any holes or gaps in between them with sand. You can also add some extra sand if needed in between the pavers if there is too much space between them when standing up straight on

How to Build a Seating Wall With Pavers

A seating wall can be an attractive and functional addition to your home. A seating wall provides an area for people to sit and relax while enjoying the outdoors. You can build your own sitting wall with pavers, cinder blocks or bricks. The type of paver you choose will determine how you build the seating wall.

Ways to Complement Your Patio Pavers with a Convenient Seating Wall in Lake  Forest, IL | Lawn Service, Landscape Design, Patio Pavers Wilmette, Lake  Forest IL, Illinois

Before you begin building your seating wall, think about what look you want it to have and where you want it located in your yard or garden. Consider adding other decorative elements such as plants, statues or fountains around the sitting area for added interest. Decide whether you want a free-standing sitting wall or one that is attached to your home. If you are going to attach it to your house, make sure that there is enough room between the house and where you plan on placing the sitting wall so that people can walk around without bumping into it.

Materials Needed

Depending on what type of pavers you are using, there are several materials needed for this project:

Bricks: You’ll need mortar mix or cement mix along with sand and water to create a mortar mixture that will bond together bricks securely when used in concrete construction projects like

In this video, I’m going to show you how to build a seating wall with pavers. This is a really easy project that anyone can do at home. It’s great for a patio or front porch, and it makes your yard look nice.

I used cinder blocks for this tutorial, but you can also use bricks or stones. If you’re using bricks or stones, just make sure they’re laid flat on the ground so they don’t fall over as easily when you lean against them.

If you want to learn more about building with cinder blocks, check out my other videos.

1. Cut the pavers to size using a masonry saw. Make sure to use gloves and eye protection throughout this process.

2. Use mortar to secure the pavers in place. Begin by placing a layer of mortar onto the concrete surface of your wall, then place your first brick on top of this layer of mortar. Continue until all of your bricks are in place, then use a trowel or butter knife to spread additional mortar over the tops and sides of each brick until it is completely covered by mortar.

A seating wall is a great way to add color and texture to a yard. The best part about them is that they are easy to add in any size and shape, so you can make it fit your yard perfectly. Here are some tips on how to build a seating wall with pavers:

1) Decide what size you want your seating wall to be. This will help determine how many pavers you need and where they should be placed.

2) Begin by marking out where each paver will go using chalk or paint. You don’t want to do this by hand because it will take forever. A stencil would work best as well, but again it’s time consuming. If you have access to a laser level, this step will be simple for you since all the levels are already marked out for you.

3) Once all the lines are drawn on the ground, start placing the pavers according to the design plan that was created earlier in this post. Make sure each one is flush with the next one so there aren’t any gaps between them when finished! Also make sure each paver has at least one side touching another so that when someone sits down on it there won’t

If you have a patio or other outdoor space, chances are you’ve thought about creating a seating wall. Seating walls are great because they provide a place for people to sit and enjoy the outdoors. They also add a nice architectural element to any outdoor space.

To build a seating wall with cinder blocks, start by laying out the blocks in the shape of your seating wall. Be sure to leave enough room for the mortar and between each block so that it doesn’t crack. After laying out all of your blocks, it’s time to fill in the gaps with mortar. You can use regular mortar or quick-setting mortar if you’re in a hurry and want to get things done quickly (but I would recommend using regular mortar). If you’re using quick-setting mortar, make sure that you mix it well before applying it to your blocks — otherwise it will not set properly!

After applying the first layer of mortar, apply another layer on top of this layer filled with more mortar and repeat until it reaches an appropriate height that matches what you want!

You can build a simple seating wall with cinder blocks and mortar. The first step is to lay the bricks on their side and set them up in a straight line. You’ll need about 10 bricks per foot of wall.

Next, mix the mortar according to the instructions on the bag and spread it over the top of the bricks, making sure you get mortar between each one. Press down on each brick to make sure that they’re all level with each other and then let them dry overnight.

Once they’re completely dry, use a hammer to tap in some nails along either side of your seating wall so that they stick out just slightly above the surface of the brickwork. Then hammer in a few more nails at different heights, but this time make sure they don’t stick out too far from underneath your new seating wall!

You can make a seating wall from cinder blocks, or concrete blocks. These blocks come in a variety of sizes, but there are two basic types: solid and hollow. Solid blocks are often used for building foundations and retaining walls. Hollow blocks have a cavity that can be filled with concrete for use in building walls and floors.

Hollow cinder blocks are the type you want for this project, because they allow you to make the frame of your seating wall before filling it with concrete. You’ll still need to use solid blocks to create the top and bottom of your seating wall, but hollow ones will give you more flexibility when it comes to spacing out your seating area.

The first step is to decide how big you want your seating wall to be. The easiest way to do this is by measuring the area where you want to place it, then drawing out its dimensions on graph paper or using an online drafting tool such as Draft Maker Pro (See Resources). You can also use a tape measure and pencil to mark out the dimensions directly onto your patio flooring surface or sidewalk. Once you’ve decided on the size of your seating wall, draw out its shape on graph paper or online drafting software and save

If you have a small patio, deck or backyard and want to create an outdoor space where you can relax with friends and family, this DIY seating wall is a great option.

The cost of this project is less than $100, but it will make a huge impact on your outdoor living space.


Cinder blocks (I used 16)

Mortar mix (I used 1/2 bag)

Tube of mortar adhesive

Trowel or tamping tool


This is a great DIY project for the patio or garden. It’s easy to build and add a little extra seating to your outdoor space. The materials needed are cinder blocks, mortar mix (cement and sand), landscaping timbers, leveler and a shovel.A Guide to Creating Curved Sitting Walls in Harrisburg, PA | Watson Supply

The first step is to place two cinder blocks on their sides with the tops touching. Secure them together with mortar mix and allow it to dry overnight (or according to the manufacturer’s instructions).

Once the mortar has dried, add in another layer of cinder blocks, making sure that each new layer is level with the previous one. You can use a leveler tool or simply make sure that each block is sitting on top of solid ground so that they’re all level when stacked together.

Continue adding layers until you reach desired height (ours is 6 feet tall).

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *