How to build a slide

How to build a wooden slide? I decided to do this How-to article based on two things: i) I got many requests from parents asking me how to build a homemade, wooden backyard playground slide and ii) because I have been building and selling them for a living for the last 5 years.

Building a playground slide can be done by any DIYer who is willing to spend a few hours putting it together, but it does require some physical effort. The good news is that you can build a slide from scratch, and there are many free plans available online. You can also buy several pre-fabricated slides and connect them all together in your backyard for the ultimate playground experience.

How to build a slide

How to build a slide is a question that comes up often in our discussion forums.

In this article, I’ll show you how to build a wooden slide. This one is made of treated lumber, but you can use any kind of wood.

I’ll also show you how to build a playground slide with 2x4s and plywood. You can use pressure-treated plywood or exterior grade plywood for this project.

I’ll go over the tools that you need and how to cut the lumber so it fits together properly. Then I’ll show how to assemble the pieces together. Finally, I’ll give you tips on painting and finishing your wooden playground equipment so it looks nice for years to come!

How to Build a Wooden Slide for Your Backyard

A wooden slide can provide hours of fun for kids and adults alike. Here’s how to build your own wooden slide.


Wooden board, such as a 2×12 or 2×10, at least 10 feet long (longer boards work better)

2-inch screws

Carpet padding

Sandpaper (optional)

A wooden slide is a great way to add fun and excitement to your backyard. It can be used by adults and children alike and provides a great place for kids to burn off some energy.

If you are thinking about building a wooden slide, there are several things you should consider before starting construction. Here are the steps involved in constructing one:DIY | How to Build a Cardboard Slide - How To Make a Big Cardboard House  for Kids | Papa & Baby MV - YouTube

Step 1 – Choose a location for the slide. The area where you will be building your slide must be level, so that it does not pitch or slope in any direction. Make sure it is also large enough for your intended use, as well as possible future expansion if desired. If you want to use it as part of an existing playground, check with local ordinances regarding the minimum size of play areas.

Step 2 – Clear away any bushes or other obstacles from around the area where you wish to build your slide. This will allow room for the base of your structure, which will require at least three feet of clearance around all sides of the finished product.

We have a slide made from 2x4s. The kids love it, but it’s time for an upgrade.

Let me start by saying that my husband and I are both very handy people, but we don’t have much experience with woodworking. We were able to build this simple wooden slide in an afternoon and we’re thrilled with how it turned out!

This post contains affiliate links for your convenience. All opinions are my own.

The one thing we know about our future backyard is that it will have a play area for the kids. We’ve been collecting ideas for fun things for them to do outside and we decided that having a slide would be perfect. We had seen other people make their own slides using 2x4s, so we decided to give it a try ourselves!

The first thing you want to do is decide where you want to put your slide. If you’re building it in your backyard, make sure there’s plenty of space, and that it’s away from trees or other obstructions.

Now that you’ve got a spot picked out, it’s time to build your slide!


Wooden boards

Tape measure

Power drill (optional)

Hammer and nails (optional)

You may be surprised to learn that it’s not very difficult to build a playground slide. There are many different types of slides, but most of them are made from wood, metal and plastic. If you’re thinking about building a slide for your kids’ playground, get started now by reading this article.

1. Measure the area where you want to build the slide. The area should be wide enough that all children can use it at one time without bumping into each other and tall enough so that they don’t fall off when they go down it.

2. Dig out the dirt in the area so that it’s level with the ground around it. This will make it easier for you to install the base for your slide later on.

3. Clean off all excess dirt from your playground area so that no loose dirt remains in any crevice or crack in the ground after you’ve dug it out earlier in this step.

4. Spread some gravel over your prepared area so that when children sit down on their backsides while going down their newly-built wooden slide they won’t get scratched up by sharp rocks underneath them as they ride down with their bottoms facing upwards towards their friends who are waiting below them at

A playground slide is a great addition to your backyard or park. The kids will love it! This article will describe how to build a wooden slide and how to install it yourself.

There are two basic types of slides: straight and curved. Straight slides are the most common, but curved slides provide more excitement for children.

If you choose to build a curved slide, be sure to make the curves gradual enough so that children can safely navigate them. If you have small children, use only half the design in this article, as shown in the diagram below.

You can build a playground slide easily with these plans

Whether you’re looking to build something for your own backyard or are looking to help out your local community, these plans will show you just how easy it is to build a wooden slide.

Building a playground slide is one of those things that can be done in a weekend. It’s also something that will be enjoyed longer than most other summer activities. If you have kids, grandkids, nieces or nephews, this project is sure to be a hit!

Materials List for DIY Wooden Slide:

2×4 lumber (4 pieces)

1×4 lumber (4 pieces)

2×6 lumber (4 pieces)

2×8 lumber (2 pieces)*

1/4″ plywood (12′ x 4′ sheet)**

5″ deck screws**

Paint or stain if desired

A wooden slide is a great addition to any playground. It’s an attraction that everyone can enjoy, and it can be used by many different people at once. Building a playground slide is not difficult, but you do need the right materials, a few tools and some basic skills.

Build a Wooden Slide for Your Playground


If you want to build your own wooden slide for your playground, there are some materials you will need:Make a Cardboard Dollhouse 7: Make the staircases

Wooden boards or planks: You will need at least two boards of equal widths and lengths as well as one board with a wider length than the other two boards for support. You could also use plywood instead of wood if that is what you have on hand. The thickness of these boards should be between 1-2 inches thick so they don’t bend under pressure from children sliding down them.

Sliding surface material: This material should be soft enough so children won’t get hurt when they fall but also sturdy enough so it doesn’t wear out too quickly under constant use by kids who aren’t always careful with their bodies while playing on equipment like this one. Rubber matting is a popular option because it’s easy to clean off and can handle being stepped on repeatedly without wearing out too quickly due to its

A playground slide is a great addition to any playground. When choosing a slide, keep your needs in mind. A three-foot tall slide may be perfect for small children, but it might not be tall enough for older kids.

There are several different types of materials you can use to construct a playground slide: metal, plastic and wood. Each material has its own advantages and disadvantages, so choose one that works best for you and your budget. You may also want to consider building the slide yourself instead of purchasing one already constructed at a store or online.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *