How to build a small closet in a bedroom

Building a closet can be a daunting task for some and may lead to a few creative headaches about how to build a small closet in a bedroom . This article will help calm those fears. It covers everything from building a closet with 2×4’s to creating a door from particle board.

Closets are of the utmost importance when you want to make a good impression. The closet serves as the storehouse for your clothes and accessories. There are individuals who lack enough space to build a separate room for their closets. Hence, they end up making a closet on the wall above their bed. And, if you happen to be one among them, then you would find this post quite useful. I’ll show you how you can build a simple small closet in the bedroom.

How to build a small closet in a bedroom

Creating a closet on a wall is a great way to add storage space in an apartment or small bedroom. Closets are small rooms that you can use as extra storage space. They come in all shapes and sizes, but the most common types are walk-in closets and built-in closets.

A walk-in closet is usually located in the master bedroom. It has lots of hanging space for clothes, shoes and other items, as well as shelves for folded clothing. You can also add lighting, mirrors and even shoe racks to your walk-in closet.

A built-in closet is usually found in smaller spaces such as hallways or bathrooms. Built-in closets have cabinets or drawers for storing clothing, linens and other items within easy reach when you need them most.

You can build either type of closet yourself with 2×4 lumber boards and plywood panels. Here’s how:

Building a closet can be a fun project. It provides an opportunity to personalize your space, add storage and make the most of your bedroom.

The first step in building your own closet is deciding what you want it to look like. You can build a small closet on a wall or create a walk-in closet with 2x4s and plywood. The size of your room will determine how much space you have for building the closet and if you need to build it into an existing wall or create new walls to accommodate it.

Choose Your Closet’s Location

Before you start building, decide where you want your new closet to go. This is more important than you might think because the location affects what materials and tools you need for construction as well as how much time it takes to complete the project.

If you’re looking to build a closet on a budget, consider building your own. If you have some basic carpentry skills and tools, you can build a closet to fit your needs and save money.

Turning a Bedroom Into a Closet - Designing Idea

Measure the space

Measure the space where you want to build your closet and make sure it’s big enough for the size of closet that you want. If you need help measuring, read our article on measuring spaces for closets.

Calculate how much lumber you’ll need

Once you know how big your closet will be, calculate how much lumber is needed for construction. You’ll need enough 2x4s (or other framing material) to frame out the walls of your closet with two studs on each side of each opening plus two more studs in between openings where they meet at right angles (see photo). Add one 2×2 piece of lumber to each side of each opening where there is no stud or joist above or below it (also known as blocking). This will give extra support for hanging clothes rods or shelves inside the closet. For added stability, attach 2×2 blocks of wood along the top edges of each wall so they sit flush with the ceiling (see photo). To calculate how many pieces 

Creating a closet in a bedroom is a great way to add much-needed storage space. If you have an unused corner, you can use it as a place to hang clothes or store shoes. If you don’t have any walls that are not being used, you can create a small closet on one of your walls.

Closets come in all shapes and sizes, so you can easily make one that fits your needs and your room’s design. The key to building a closet is planning out what type of closet you want and what size it should be. Once you know the size of the closet you’re going to build, it will be much easier to decide what materials need to be used and how they’ll be assembled together

Here are some tips on how to build a small closet on one of your walls:

1)Measure the area where you’d like the new closet to go

2)Choose the type of doors for the new closet – whether they will be sliding or hinged doors

3)Create rough sketches showing where all of your components will go in relation to each other

Closets are a great way to maximize the use of space in your home. They can be built right into the walls, or they can be built on top of existing cabinets, closets or other furniture. Building a closet is not difficult if you know what you’re doing and have the right tools and materials on hand.

Here are some tips for building your own closet

1. Choose a place where you want to install the closet. A closet should be placed in an area that is convenient and accessible. Closet doors should also be easy to open and close without hassle. Make sure that there is enough floor space between the closet door and wall so that you can open the door freely when needed, without hitting anything else in its path.

2. Lay out all the materials needed for construction before getting started with any work in order to avoid running out of materials halfway through construction and having to wait for them to arrive again before continuing work on your project.

3. Build all walls according to plan specifications before installing any shelving or hanging rods inside them; this will prevent any unnecessary frustration later on down the line when trying to install different fixtures inside these walls while they are still

How To Build A Closet With 2x4s

Build a simple set of shelves on the wall. You can use a 2×4 and two brackets to create two shelves. If you want to make your own brackets, use these instructions.

Measure the height of your closet and cut four pieces of 2×4 to fit between the studs. Cut one piece for each side and one piece for each end of the shelf.

Attach the ends to both sides by screwing them into the studs with 3-inch wood screws (see photo). If you don’t have access to the back side of your studs, you can use drywall anchors instead of wood screws.

Screw a brace from each end piece into the bottom side piece with 3-inch wood screws (see photo).

Lay out all four pieces on their backs on a flat surface so that they’re ready for assembly when it’s time to mount them on your wall.

How to build a closet on a wall

1. Mark the center of the wall, then mark the horizontal and vertical lines for each shelf. Measure down from the ceiling and make marks for top and bottom shelves, then measure up from the floor and make marks for middle shelves. Draw a line connecting these dots.

2. Cut 2x4s to length for each shelf using a circular saw or handsaw. Cut enough 2x4s to fill in the gaps between your lines and make sure they’re long enough to span from floor to ceiling with an extra foot or two of overhang at each end (for attaching to studs).

3. Assemble each shelf by screwing one piece of 2×4 into another at right angles using two 3-in.-long screws per joint (use a clamp to keep them aligned while you drill pilot holes). If you’re building more than one shelf at once, align them so they’re straight and level before attaching them together with more screws.

Creating a closet is not as complicated as it sounds, especially when you’re using 2x4s. The key is to make sure the wood is cut properly and that all of your joints are square and tight. The work will go much faster if you have someone to help hold things up while you’re building.

1. Cut the 2x4s to length

2. Use a framing square to mark 45-degree angles on the front of each side wall piece (A). Position your square so that one leg is against the bottom of the wall and another leg is against the top of the wall, then use a pencil to mark each corner at an angle that’s 90 degrees from both sides of your framing square (B).

3. Cut notches out of each corner with a circular saw or jigsaw (C). Make sure you cut through both boards at once so that they remain in perfect alignment with each other when they’re nailed together later on. You’ll be left with two triangles in each notch that fit perfectly together when you put them back together later on (D).

Closet framing is easy to do, but you’ll need to use a few different methods depending on the size of your closet and the materials you have on hand.

Which is Best for Your Home: Wardrobes vs Walk-In Closets - BANNI

The most important thing to remember when building a closet is that it’s not just the walls that support the weight of the clothes; it’s also the floor. If you’re building over a basement or crawl space, make sure there’s enough room underneath for storage boxes and shelving. Also, be aware that some closets are built on top of an exterior wall. The weight of those boards can be significant if they’re stacked two or three deep (as they often are).

Basic Closet Framing

The simplest way to frame a closet is by using 2x4s (or 2x3s) as vertical supports at 24-inch intervals and attaching horizontal 2x4s every 48 inches along their length. This will provide plenty of strength for hanging clothes. You’ll also need to nail in diagonal bracing between each vertical support to prevent sagging at those points.

The best way to attach this type of framing is with pocket screws: Drill pilot holes for each screw, then drive them in until they meet resistance (don’t over-tighten!). If you don’t

The 2×4 closet is a great way to maximize space and save money. It’s also easy to build.

Check out the video above for detailed instructions on how to build a simple 2×4 closet with stairs. You can also see how this project compares with our other closet design options here.

You’ll need:

1 sheet of 3/4″ plywood or OSB (8′ x 4′)

3 sheets of 1″x3″ furring strips (12′ long)

1 box of 3″ screws*

2×4 boards (12′ long)

1 box of 1 1/2″ drywall screws

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *